| Size | 4" Diameter, 5" Diameter, 6" Diameter, 8" Diameter, 10" Diameter, 12" Diameter |
|---|---|
| Finish | Satin, Mirror |
Stainless Steel Ball Ornament
Stainless Steel Ball Ornament
$311.00
The Stainless Steel ball for the top of the flagpole is made out of stainless steel instead of spun aluminum like our flagpole balls here. These are available in a satin finish or a mirror finish from 4″ to 12″. The diameter of the ball should closely match the diameter of the base of the flagpole. The 4″-8″ balls have a 1/2″-13NC spindle threading and the 10″ & 12″ balls have a 5/8″-11NC spindle threading.
Related Products
![retainer rings]()
Retainer Rings
$77.00Retainer rings are used to keep the bottom of the flag close to the pole on internal halyard flagpoles. It also acts as an aid when lower and raising the flag on the pole.
The size of the retainer ring is based on the base diameter of the flagpole. They are available in white, silver, bronze, and black to match the color of your flagpole.
We have larger sizes available in white. If you need a larger size, give us a call at 303-431-1117 or email us at admin@customflagcompany.com.
![E-16 Eagle Gold]()
E-16 Aluminum Flying Eagle
$229.00Our decorative flying eagle is perfect for the top of the flagpole. This is an alternative option to the ball ornament that comes standard with a flagpole.
The E-16 eagle has a wing span of 15″ and is 18″ tall with 1/2″-13NC spindle threading. This is perfect for 25′ to 35′ flagpoles.
Need a bigger eagle? Shop our E24 eagles. Need a smaller eagle? Shop our E-11 eagles.
![Flagpole Weights]()
Flagpole Weight
$72.00Flagpole weights are used on internal halyard flagpoles. They attached to the bottom of the flag, where the retainer rings is, to keep the flag rising up on the flagpole. They are made of 2″ diameter steel and coated with plastisol.
3-1/2″: has one eyebolt to attached to one end. Used on flags up to 6’x10′.
7″: has two eyebolts attached to each end. Used on flags from 8’x12′ – 12’x18′.
14″: has two eyebolts attached to each end. Used on flags 15’x25′ and up.Colors available: White, Silver, Bronze, Black
![Winch Handles]()
Winch Handles
$77.00The winch handle is inserted into internal halyard winch based flagpoles to lower and raise the flag. Depending on which winch you have, will depend on which winch handle you will need.
Square winch handle – this handle is for a stainless steel winch, the most common handle.
M-5 winch handle – this handle is specifically for M-Winches. The M-5 is for flagpoles with a 5″ base diameter.
M-612 winch handle – this handle is specifically for M-Winches. The M-612 is for flagpoles with a 6″ – 14″ base diameter.Shop stainless steel winches here.
